SunTek

Reaction

Clear gloss

Clear, glossy paint-protection film. SunTek describes a water-repelling Tetrashield-based outer coating, stain resistance and heat-assisted recovery from surface scratches.

Features described by the manufacturer

More about this film

SunTek describes Reaction as a clear gloss film with heat-assisted surface-scratch healing, stain resistance and a Tetrashield-based hydrophobic topcoat.

  • Heat-assisted healing of surface scratches.
  • Tetrashield-based hydrophobic topcoat.
  • Clear gloss appearance and stain resistance.
Feature source

Film details

Finish
Clear gloss
Film + adhesive
Installed total unconfirmed

The installed thickness for the North American film is unconfirmed. A separate sheet says 7–8 mil without identifying the included layers or market.

What’s included
The reviewed North American sources do not establish an installed thickness. A separate June 2024 sheet lists 7–8 mil without confirming the included layers or applicable market.
Technical sources

Limited warranty

12-year limited warranty

USA & Canada · current local version unconfirmed

SunTek’s current product page confirms the twelve-year headline. Detailed terms here come from a manufacturer-authored May 2025 warranty hosted by distributor SAGR Products; the governing local version still needs confirmation.

Coverage
Professional SunTek installation. Original purchaser only; coverage is nontransferable.
Covered problems
Cracking, bubbling and yellowing. The Reaction entry does not list discoloration as covered.
Conditions
The reviewed copy covers fully cured factory paint, subject to its terms. It also mentions automotive stainless steel; confirm exact product and surface eligibility before applying that wording to Reaction.
Important exclusions
Repainted or aftermarket paint, vinyl, the durability of hydrophobic properties, and damage or stains from outside forces are excluded.
Ownership, start date & paperwork
If a claim qualifies
Covered replacement includes removal and reinstallation under the reviewed document.
When it starts
Start date unconfirmed; ask for the warranty supplied with your installation.
If you sell the car
Original purchaser only; coverage does not transfer.
Paperwork
Registration requirements and deadlines were not confirmed.

This is a summary of selected terms. The warranty supplied for your film and location governs any claim.

Durability and warranty: what’s the difference?

Caring for this film

  • The May 2025 warranty copy requires at least 3 days before washing or waxing, extended to 7 days when the average daily temperature is below 55°F.

SunTek’s public FAQ gives a simpler three-day wait. The warranty copy adds the temperature condition. Ask your installer for the current local instructions.

Care instructions and sources

Details to confirm before booking

  • The current North American installed thickness and included layers.
  • A current manufacturer-hosted copy of the full warranty.
More about these specifications
  • The distributor-hosted June 2024 sheet’s 7–8 mil figure does not establish an 8-mil installed specification for North America.
  • SunTek’s “up to 25%” resistance claim does not identify comparator products or a complete test protocol on the public page.
  • The supplemental sheet reports SAE J400/ASTM D3170 and ASTM D7869 testing. These reports do not provide a matched cross-brand comparison. This site has not independently tested the film.

Manufacturer documents

Find more product-specific instructions in the technical resource library.

Sources checked October 16, 2026. North American product information and a USA/Canada warranty copy. The supplemental thickness sheet does not state its applicable market.

Document dates & details
Explore all films Explore SunTek in the brand directory →Understand the warranty